POSIBLES IMPACTOS DE LA FABRICACIÓN ADITIVA EN LA CADENA DE SUMINISTRO
Resumen
El presente trabajo analiza en la bibliografía la intervención de la Fabricación Aditiva o Impresión 3-D en la Cadena de Suministro y propone posibles escenarios futuros donde se modifican niveles y actores en la cadena. La impresión 3-D se encuentra en constate evolución y poco a poco está siendo partícipe de sistemas de producción, modificando los procesos productivos y de distribución a los cuales estamos acostumbrados. Los posibles impactos de la Fabricación Aditiva en la Cadena de Suministro propuestos en este trabajo se detallan por las etapas determinadas en la bibliografía y por modelos mixtos propuestos a partir de estas y son los siguientes: Primera etapa: Prototipado, Segunda Etapa: Impresión 3-D para partes o productos finales en fábrica o comercio, Tercera Etapa: Impresión 3-D en casa, Modelo Mixto 1: Impresión en Fábrica y en Casa y Modelo Mixto 2: Impresión en Casa con autorización de la Marca. Los diferentes escenarios también son comparados entre sí mediente el modelo SCOR, en donde se determina la participación o no de ciertos actores de la Cadena de Suministro y la modificación en sistemas de producción y distribución.Descargas
Los datos de descargas todavía no están disponibles.
Citas
Cottrill, K., y Rice, J., “Innovative or Inconclusive? Evaluating new supply chain ideas”, MIT Center for Transportation & Logistics, pp.1-23, spring 2013.
Gibson, I., “Business opportunities and future directions”, Additive manufacturing technologies, pp.437-446, 2010.
Wittbrodt, B. T., Glover, A. G., Laureto, J., Anzalone, G. C., Oppliger, D., Irwin, J. L., y Pearce, J. M., “Life-cycle economic analysis of distributed manufacturing with open-source 3-D printers”, Mechatronics vol. 23, pp. 713-726, june 2013.
Reeves, P., Tuck, C., y Hague, R., “Additive manufacturing for mass customization”, Mass customization, pp. 275-290, 2011.
Wohlers, T., “Worldwide Trends in Additive Manufacturing”, US‐TURKEY Workshop on Rapid Technologies, september 2009.
Khajavi, S. H., Partanen, J., y Holmstrom, J., “Additive manufacturing in the spare parts supply chain”, Computers in Industry vol. 65, pp. 50-63, january 2014.
Liu, P., Huang, S. H., Mokasdar, A., Zhou, H., y Hou, L., “The impact of additive manufacturing in the aircraft spare parts supply chain: Supply chain operation reference (scor) model based analysis”, Production Planning & Control vol.25, pp1-13, 2013.
Walter, M., Holmström, J., Tuomi, H., y Yrjölä, H., “Rapid manufacturing and its impact on supply chain management”, en Logistics Research Network Annual Conference, pp.9-10, january 2004.
Hopkinson, N., “Additive Manufacturing: What’s happening and where are we going with printing in the third dimension?”, Becta, pp.1-22, october 2010.
Cohen, D., Sargeant, M., y Somers, K., “3-D printing takes shape”, McKinsey Quarterly, pp.1-6, january 2014.
Mellor, S., Hao, L., y Zhang, D., “Additive manufacturing: A framework for implementation”, International Journal of Production Economics vol. 149, pp.194-201, march 2014.
Cozmei, C., y Caloian, F., “Additive manufacturing flickering at the beginning of existence”, Procedia Economics and Finance vol. 3, pp.457-462, 2012.
Cottrill, K. “Transforming the future of supply chains through disruptive innovation: Additive Manufacturing”, Global Communications Consultant MIT Center for Transportation & Logistics, pp.1-13, spring 2011.
Berman, B., “3-D printing: The new industrial revolution”, Business Horizons vol. 55, pp.155-162, march-april 2012.
Birtchnell, T., y Urry, J., “3D, SF and the future”, Futures vol.50, pp.25-34, june 2013.
COTEC, “Fabricación Aditiva”, Documentos Cotec sobre oportunidades tecnológicas, octubre 2011.
“The growing UK 3D printing market”, metal-powder.net, pp.36-38, february 2014.
“3D printer has increased capabilities”, Metal Powder Report vol. 67, pp.46, 2012.
Bourell, D. L., Beaman, J. B., Leu, M. C., y Rosen, D. W., “A brief history of additive manufacturing and the 2009 roadmap for additive manufacturing: looking back and looking ahead”, US‐TURKEY Workshop on Rapid Technologies, september 2009.
Chandra, C., y Grabis, J., Supply chain configuration: Concepts, solutions, and applications. Springer US, 2007.
De Beer, N., “Additive Manufacturing Turning Mind into Matter”. Sierra College Center for Applied Competitive Technologies (CACT), pp.1-60, may 2013.
Hon, K. K. B., “Digital Additive Manufacturing: From Rapid Prototyping to Rapid Manufacturing”, En Proceedings of the 35th International MATADOR Conference, pp. 337-340, 2007.
Huang, S., Liu, P., Mokasdar, A., y Hou, L., “Additive manufacturing and its societal impact: A literature review”, The International Journal of Advanced Manufacturing Technology vol. 67, pp.1191-1203, july 2013.
Lindemann, C., Jahnke, U., Moi, M., y Koch, R., “Analyzing product lifecycle costs for a better understanding of cost drivers in additive manufacturing”, En 23rd Annual International Solid Freeform Fabrication Symposium, August 2012.
Wohlers, T., “Additive Manufacturing and 3D Printing State of the Industry Annual Worldwide Progress Report”, Wohlers Associates Inc., 2012.
Wohlers, T., y Gornet, T., “History of additive manufacturing”, Wohlers Report 2012: State of the Industry, pp. 1-26, 2012.
Gibson, I., “Business opportunities and future directions”, Additive manufacturing technologies, pp.437-446, 2010.
Wittbrodt, B. T., Glover, A. G., Laureto, J., Anzalone, G. C., Oppliger, D., Irwin, J. L., y Pearce, J. M., “Life-cycle economic analysis of distributed manufacturing with open-source 3-D printers”, Mechatronics vol. 23, pp. 713-726, june 2013.
Reeves, P., Tuck, C., y Hague, R., “Additive manufacturing for mass customization”, Mass customization, pp. 275-290, 2011.
Wohlers, T., “Worldwide Trends in Additive Manufacturing”, US‐TURKEY Workshop on Rapid Technologies, september 2009.
Khajavi, S. H., Partanen, J., y Holmstrom, J., “Additive manufacturing in the spare parts supply chain”, Computers in Industry vol. 65, pp. 50-63, january 2014.
Liu, P., Huang, S. H., Mokasdar, A., Zhou, H., y Hou, L., “The impact of additive manufacturing in the aircraft spare parts supply chain: Supply chain operation reference (scor) model based analysis”, Production Planning & Control vol.25, pp1-13, 2013.
Walter, M., Holmström, J., Tuomi, H., y Yrjölä, H., “Rapid manufacturing and its impact on supply chain management”, en Logistics Research Network Annual Conference, pp.9-10, january 2004.
Hopkinson, N., “Additive Manufacturing: What’s happening and where are we going with printing in the third dimension?”, Becta, pp.1-22, october 2010.
Cohen, D., Sargeant, M., y Somers, K., “3-D printing takes shape”, McKinsey Quarterly, pp.1-6, january 2014.
Mellor, S., Hao, L., y Zhang, D., “Additive manufacturing: A framework for implementation”, International Journal of Production Economics vol. 149, pp.194-201, march 2014.
Cozmei, C., y Caloian, F., “Additive manufacturing flickering at the beginning of existence”, Procedia Economics and Finance vol. 3, pp.457-462, 2012.
Cottrill, K. “Transforming the future of supply chains through disruptive innovation: Additive Manufacturing”, Global Communications Consultant MIT Center for Transportation & Logistics, pp.1-13, spring 2011.
Berman, B., “3-D printing: The new industrial revolution”, Business Horizons vol. 55, pp.155-162, march-april 2012.
Birtchnell, T., y Urry, J., “3D, SF and the future”, Futures vol.50, pp.25-34, june 2013.
COTEC, “Fabricación Aditiva”, Documentos Cotec sobre oportunidades tecnológicas, octubre 2011.
“The growing UK 3D printing market”, metal-powder.net, pp.36-38, february 2014.
“3D printer has increased capabilities”, Metal Powder Report vol. 67, pp.46, 2012.
Bourell, D. L., Beaman, J. B., Leu, M. C., y Rosen, D. W., “A brief history of additive manufacturing and the 2009 roadmap for additive manufacturing: looking back and looking ahead”, US‐TURKEY Workshop on Rapid Technologies, september 2009.
Chandra, C., y Grabis, J., Supply chain configuration: Concepts, solutions, and applications. Springer US, 2007.
De Beer, N., “Additive Manufacturing Turning Mind into Matter”. Sierra College Center for Applied Competitive Technologies (CACT), pp.1-60, may 2013.
Hon, K. K. B., “Digital Additive Manufacturing: From Rapid Prototyping to Rapid Manufacturing”, En Proceedings of the 35th International MATADOR Conference, pp. 337-340, 2007.
Huang, S., Liu, P., Mokasdar, A., y Hou, L., “Additive manufacturing and its societal impact: A literature review”, The International Journal of Advanced Manufacturing Technology vol. 67, pp.1191-1203, july 2013.
Lindemann, C., Jahnke, U., Moi, M., y Koch, R., “Analyzing product lifecycle costs for a better understanding of cost drivers in additive manufacturing”, En 23rd Annual International Solid Freeform Fabrication Symposium, August 2012.
Wohlers, T., “Additive Manufacturing and 3D Printing State of the Industry Annual Worldwide Progress Report”, Wohlers Associates Inc., 2012.
Wohlers, T., y Gornet, T., “History of additive manufacturing”, Wohlers Report 2012: State of the Industry, pp. 1-26, 2012.
Descargas
Publicado
2018-02-15
Número
Sección
Artículos
